15 best heat guns

Heat guns - the installations intended for fast heating of inhabited or production rooms. They are volumetric heaters, the heat from thermoelements of which is transferred not by convection, but by heated air masses, which allows to heat the given areas with greater efficiency.

When choosing a heat gun, the following criteria should be taken into account: what size room is to be heated, what are the power characteristics of the device itself and what is the nominal volume of the air flow. However, paramount attention should be given to the selection of high-quality and durable model that can serve for a long time and without critical problems.

In order to facilitate your choice, we have compiled a unique rating of the best models of heat guns, based on technical specifications, price quotes, feedback from numerous users, and the opinion of recognized experts in the field of heating engineering. Each of the nominees included in the ranking is carefully checked according to a number of criteria and deserves close attention from the consumer audience.

The best electric heat guns

Electric heat guns are compact (compared to other types) devices equipped with heating elements in the form of heating elements, the heat from which is transferred by circulating air flows. The cost of such installations is low, and operation does not cause any difficulties. The main disadvantages are the high power consumption and the dependence of the heat gun on a powerful power source.

3 ELITECH TP ​​3ER

Opens the top three best electric heat gun Elitech TP 2EM. Low-power, it is intended for use exclusively in small residential areas or garages. This is due to the fact that during intensive work the heat gun produces almost no noise. The long heating of the stainless steel heating element is compensated by a quite acceptable level of air exchange - about 260 cubic meters per hour.

To protect against overheating, a special thermostat is installed under the body of the device. The thermostat is automatically turned off when the critical temperature is reached. It should be said that the assembly itself was made perfectly well - users note the high operational capabilities of the installation even after three to five years of use. Yes, and the price is available to a wide range of consumers.

Advantages:

• excellent build quality;
• compactness and good performance;
• during the work noise is almost absent;
• several regulation modes;
• the presence of protectors from overheating;
• low cost.

Disadvantages:

• low heating power - not suitable for large rooms.

2 Timberk TIH R5 3M ECO

On the second line of the ranking is the brainchild of the Scandinavian company Timberk, an electric heat gun model TIH R5 3M ECO. From season to season, this line delights customers with new, even more advanced models of heat installations, and our bidder is no exception. In general, the gun looks very decent, which was largely due to some structural changes.

To protect the body from corrosion and increase resistance to contact with rough surfaces, special fine spraying was used. As for the technical characteristics, here we should note the maximum value of air exchange, equal to 300 cubic meters per hour, and the optimum level of noise emitted during intensive work at the maximum power of 3 kW. This heat gun is ideal for heating rooms up to 30 square meters.

Advantages:

• low cost;
• excellent build quality;
• the presence of rubberized linings on the heat gun leg;
• high performance;
• the presence of a thermostat;
• the ability to work in fan mode.

Disadvantages:

• not detected.

1 Interskol TPE-5

Despite the abundance of models in the heat gun market that can effectively heat rooms up to 45-50 square meters, users chose Interskol TPE-5, an installation that ranks first in the ranking and deservedly gets the title of the best. Several heating elements made in the form of fikhral spirals provide heating power up to 4.5 kW. Together with the parameters of the fan, the total volume of the air emitted is nearly 400 cubic meters per hour. Heating of the room starts very quickly, since the heating of the thermoelements of the heat gun to the operating temperature occurs in a matter of minutes.

Advantages:

• optimal cost;
• operational heating of the room;
• the double-sided cover provided by the construction prevents the installation from fast overheating;
• availability of shutdown function in case of overheating;
• the possibility of vertical adjustment of the position of the body;
• presence of fan mode.

Disadvantages:

• not detected.

The best gas heat guns

If the capacity of the electric heat gun is not enough to heat the room, they are replaced by more powerful gas types of heat units. As a rule, they are designed to heat significantly larger areas (an average of 100 square meters), rather than the above-described middle-class models, with almost identical airflow. The only drawback and danger when working with gas heat guns is to work with an explosive power source that needs special operating conditions.

3 BALLU BHG-10

Despite the general skepticism about devices of this caliber made in China, Ballu has gained considerable popularity around the world. The production of heat guns, including the BALLU BHG-10 gas heating unit, which took the third place in our rating, contributed in many ways to this success. This is typically an industrial model designed for heating a room of about 100 square meters. It differs from other applicants in the minimum consumption of gaseous fuel - 0.7 kilogram per hour with a maximum heating power of 10 kW. Only propane can be used as a fuel here, which can be regarded as a minor flaw. However, in general, users are satisfied with the heat gun, and note stable operation throughout the operational period.

Advantages:

• optimal fuel consumption;
• attractive price;
• heating area (about 100 m²);
• mechanical control.

Disadvantages:

• the inability to use alternative sources of gaseous fuel with the exception of propane.

2 Master BLP 17 M

A step away from the leading position, the model of the gas gun BLP 17 M from the Italian company Master stopped. The main difference of this unit from others, which are in the top three, is in the output of thermal power, which is 16 kW with the possibility of a gradual reduction to 10 kW. The fuel unit uses propane and butane as a fuel, its consumption fluctuates around 1.16 kilograms per hour.

Theoretically, such a gun can be used to heat industrial premises with an area of ​​up to 110-120 square meters - this is where its effectiveness will fully manifest itself. Judging by the reviews of the owners, the installation is economical, reliable and accurate assembly, and also has a balanced cost. When using a heat gun to maintain a comfortable temperature in garages and repair boxes (rooms in which entrance gates often have to be opened), Master BLP 17 M does an excellent job with the task, heating about 300 m³ per hour of operation.

1 Interskol TPG-10

First place rightfully goes to the next representative of the company "Interskol" - model of the gas heat gun Interskol TPG-10. It cannot be said that technically it surpasses all its competitors, however, in terms of reliability and protection, not a single presented model can match it. Possessing the potential for operational heating of 100 square meters of space, the gun produces up to 30 kW of thermal power. As a security system, it provides auto-off function, protection against overheating and improved thermal insulation of the case.

Summing up, I would like to note that Interskol TPG-10 is a typical industrial model of a heat gun, which has good technical and sacrificial parameters, is inexpensive and extremely simple to use. The latter two characteristics are most appreciated by the owners.The presence of piezoelectric ignition and quite low fuel consumption (0.76 l / h) are also considered in many reviews as the indisputable advantages of this model.

The best diesel heat guns

Diesel heat guns are the most powerful class of heat installations. Their use is advisable only in large industrial facilities, where large areas are subject to heating. Despite a clear performance advantage, the type of fuel used imposes certain restrictions on the operation of diesel devices. The thing is that the exhaust gases very quickly fill the room, which can cause slight discomfort or poisoning. The cost of such installations is also high, but fully justified by the efficiency of the work and technical characteristics.

3 BALLU BHDP-20

The third place given to the diesel heat gun BALLU BHDP-20 should not be misleading. In comparison with other applicants for a higher place, it is less productive, but in terms of price and quality it is not inferior to them. The heating capacity of this heat gun is 20 kW, which is enough to maintain an industrial space of up to 200 square meters. Fuel consumption does not exceed 1.6 kilogram per hour. For the sake of compactness and ease of movement of the gun manufacturer has significantly reduced the volume of the fuel tank to 12 liters. As a result: we get an advantage on the one hand and a disadvantage on the other. But in general, the model causes only pleasant feelings.

Advantages:

• compactness;
• low weight of the structure;
• heating capacity is 20 kW;
• optimal price.

Disadvantages:

• small amount of fuel tank.

2 MASTER B 100 CED

The second place ranking among other things equal goes to the Italian diesel heat gun MASTER B 100 CED. The choice of the average representative of the model range is dictated by the balance between productivity, mobility and total cost. It is not known for sure what is the maximum heated area, but the heat output of the gun reaches almost 29 kW. Fuel consumption per hour of work is 2.3 kilograms with a total tank capacity of 44 liters. In terms of mobility, everything is as follows: the main structure, whose mass is 25 kilograms, is arranged on a mobile trolley equipped with handles and a pair of wheels, and therefore the movement does not require large physical costs. As for the cost, it fully complies with all parameters of the heat gun.

Advantages:

• high quality installation;
• the presence of a transport trolley;
• high heat output (29 kW);
• mobility;
• tank capacity (44 liters).

Disadvantages:

• thermostat is included as an option, which will have to pay.

1 ELITECH TP ​​120 DP

The leader of our rating in the category of diesel heat guns has become a high-performance unit - ELITECH TP ​​120DP. This "monster" is able to properly heat a large area of ​​the premises (up to 800 m²) with a large volume. Working in peak mode, the device is capable of producing up to 120 kW of thermal power. The mechanical control system of the gun has an intuitive and so simple interface that even an inexperienced user can independently figure out what's what.

Far from small dimensions determine the impressive weight of the device - 74 kilograms. The manufacturer supplied the heat gun with a number of systems providing safe operation - overheating sensor, thermostat and electrical protection from power surges. The owners, in their reviews, speak positively about the capabilities of the unit: this is the mobility of the heat gun, and an impressive 110-liter fuel tank. The rate of air exchange is also highly appreciated - per hour of operation, the gun is capable of heating 2124 cubic meters of air.

The best multi-fuel heat guns

Disposal of waste oil or waste arising from the processing of wood (especially in large volumes) requires some financial costs. Acquisition of heat guns, working on the specified raw materials, will allow not only to dispose of these types of waste free of charge, but also to provide heating for industrial premises in winter.

3 Heatter Thunder 20 kW

Great solution for garage, repair shops or small storage facilities. The heating unit burns waste engine oil and has a fairly high efficiency - its efficiency is 88%. For convenience of operation, the entire electrical part is made in a separate unit and contains a microprocessor control and safety system.

The owners really like the efficiency of the heat gun - the consumption is not more than 2.1 l / hour at maximum power. By the most conservative estimates, the cost of such heating is more than twice as economical as wood-fired systems. In addition, the reviews noted the reliability of the equipment, ease of operation and its durability. The above characteristics are confirmed by the manufacturer’s warranty for the first year of operation.

2 ITProm PROMA-100

The use of timber and wood processing products in a modern high-performance unit can not only provide high economic benefits, but also make it possible to usefully recycle waste from the main activity without any costs. Also as a fuel manufacturer allows the use of low-calorie coal.

The heat gun has a rather impressive weight of 800 kg and is capable of heating a strand of 500 m². The electrical part of the equipment consists of a fan with a capacity of 3400 m³. In general, the heat gun is characterized by high performance, reliability and durability (at least 20 years). Owners who use PROMA-100 for heating garage boxes and storage rooms, leave only positive feedback on the operation of this installation.

1 MASTER WA-33

The heat gun runs on waste oil and can provide room heat up to 650 m². Such a unit is most suitable for warehouses and hangars, garage boxes and workshops. Consumption "working out" is not more than 3 liters / hour (at maximum power). The manufacturer has provided a whole set of protective functions and secured the work of the heat gun as much as possible.

The owners, who have chosen this model for their needs, are more than satisfied with the result. The unit has high efficiency, and it can work on almost all types of motor, hydraulic and transmission oils. The reviews also positively note the robust housing, the electronic fuel supply and adjustment system, safety and cleanliness of combustion - exhaust gases are evacuated outside by means of the exhaust duct and are not in any way in contact with heated air inside the room.

The best water heat guns

Water heat generators are able to heat rooms with a large area and volume, while spending a minimum of energy resources. They do not dry the air, they are highly efficient and environmentally friendly (no combustion products are released). A distinctive feature of these units is the low noise level and the possibility of using in rooms with high humidity, including residential ones.

3 Frico swh33

The heat gun of the Swedish producer differs in expanded opportunities of management. The built-in SIR system can regulate the air flow rate, set the desired air temperature, control several heaters at the same time and program the work algorithms for the week ahead.

Owners appreciate the characteristics and convenient control of a heat gun working with a heat transfer fluid. The quietest electric fan makes the work of the unit almost imperceptible, and the possibility of wall or ceiling mounting allows you to seamlessly integrate equipment in the premises with any design solutions. In the feedback of the owners, the high quality of the components is emphasized (the manufacturer’s warranty is given for three years) and the concise design. But the high cost (despite its validity) does not satisfy everyone.

2 Kalashnikov KVF-W21-12

The domestic manufacturer produces a fairly competitive model of a heat gun Kalashnikov KVF-W21-12, working with a water coolant. Its power is a little less than 20 kW, and the length of the air flow reaches 18 meters. The products are of high quality, which the manufacturer’s warranty for three years does not allow to doubt.

The owners have appreciated this heat gun, which, moreover, can be controlled through a remote control panel. The reviews positively assess the possibility of wall mounting with an angle of inclination (up to 15 °), which allows you to effectively use these devices in gyms, showrooms and other spacious rooms. The direction of the stream of warm air can be additionally regulated with the help of blinds, and the intensity of the flow - by switching the fan speeds.

1 Zilon HP-80.003W

The German manufacturer Zilon boasts a highly efficient heat gun. Its maximum power can be 70 kW (inlet water temperature should be at the level of 90 ° C). At the same time, the air is heated at 45 ° C, and the length of the heat jet reaches 25 meters. A fan of only one installation can, in an hour of operation, drive through a heat exchanger 5.5 thousand m³ and heat a large enough room.

Judging by the reviews of the owners, the Zilon HP-80 gun is highly economical, has a waterproof housing, which makes it possible to use them not only for heating industrial premises, but also in car washes or in swimming pools. The lowest energy consumption, compact size and attractive appearance - these characteristics of the device deserve high ratings from consumers. In addition, the presence of protection against overheating, long service life and manufacturer's warranty (24 months) became a weighty argument for the Zilon HP-80 heat gun to become the leader in its category.

Popular vote - who is the best heat gun manufacturer?
We vote!

Interskol

Resanta

BALLU

Elitech

Master

Timberk

Redmond

Shivaki

ITProm

Heatterm

Zilon

Kalashnikov

Frico

Total voted: 17

Vote results