12 best cordless drills

Cordless drill screwdriver - one of the most popular types of power tools, as it is super universal. The device is able to perform both the functions of a conventional drill due to the large torque and used for tightening the screws and screws (as a classic screwdriver). For this, the drill / driver is equipped with a clutch for switching the torque value. This allows you to increase the scope of work, from the usual twisting screws into the hyposcreen, to drilling holes in the concrete wall.

The presence of a battery has a positive effect on the usability of the tool. It can be used where there is no outlet or when the work involves the frequent movement of the master (the wires are constantly underfoot or there is not enough length of the power cord). However, you should know about the drawbacks of batteries. Firstly, they require recharging, although most models come with two batteries. Secondly, cordless drills - screwdrivers are slightly more expensive than network ones. Thirdly, the batteries themselves are consumables, and sooner or later fail and require replacement (depending on the intensity of operation).

If you compare a conventional screwdriver with a drill - a screwdriver, then the latter gains versatility at the expense of the drill function. But loses in ergonomics and usability, due to the greater mass.

You should also be aware of the key parameters of the drill / screwdriver, which you should pay attention to when choosing:

• Battery capacity. For household needs and rare use, a tool with a battery capacity in the range of 1.2-1.5 A / h, capable of providing a charge for two to three hours, is suitable. In the case of buying a drill-screwdriver for a full-fledged workshop and frequent use should be given preference to more "capacious" models.
• Supply voltage. This parameter determines the amount of torque on the spindle. Simply put, the higher the supply voltage, the easier it is for the machine to drill holes and screw in screws of a larger diameter. For home needs, ideal drill drill with a battery at 12-14 V.
• The maximum number of revolutions. The number of revolutions per minute characterizes the tool's ability to twist screws (or drill holes) of a certain diameter. Since at home the most common work with medium size (6-12 mm), then two speeds and 1200-1500 revolutions per minute will be quite enough.
• Torque. Key feature showing the "power" of the tool.The larger this parameter, the higher the ability of the drill / screwdriver to drill large holes and hard materials.
• Cartridge device. Since no one wants to suffer with the rigging, the best choice for purchase will be a screwdriver with a single-footed chuck. It is extremely easy to use and has a higher degree of reliability (due to the smaller number of constituent elements).
• Optional solutions. If the parameters of ergonomics play a key role for you, pay attention to such additional elements as the second handle, the presence of the punch function, the corner nozzle for placing drills and bits, and also the extended set of accessories. With them, a modest instrument can turn into a multifunctional apparatus for performing professional-level work.

We bring to your attention the TOP of the best cordless drills - screwdrivers in the categories: light, inexpensive and professional models.

The lightest cordless drills

The weight of the screwdriver is an important parameter, especially for those who often have to use the tool. For example, furniture assemblers, repairmen. The lighter the screwdriver, the less tired the arm (especially the wrist joint) and the easier and more comfortable it is to work.

As a rule, the lightest models are those that are equipped with lithium-ion batteries (Li-Ion). With the same dimensions as a nickel-based acb, Li-Ion has a higher energy density. From here, you can use less battery weight without reducing the tool life. Do not forget about the other important plus Li-Ion-batteries - they have no memory effect, which means you do not need to wait for the battery to completely discharge before recharging (as is the case with Ni-Cd and Ni-MH batteries).

Lightweight screwdrivers are a tool for professionals. We offer you to get acquainted with the three best cordless drills in the lightweight "weight category".

3 Hitachi DS10DAL

Inexpensive version of the hammerless drill-screwdriver from the company Hitachi, whose weight is only one kilogram. Despite this, the performance remains at a very high level: the keyless chuck is able to work with drills with a diameter of 0.8 to 10 millimeters (for metal), the idling speed at the peak can reach 1300 revolutions per minute, and the torque on the spindle increases up to up to 36 Nm.

The Hitachi DS10DAL lithium-ion battery has a standard voltage of 10.8 V, and it takes a little over 40 minutes to fully charge it. Among other things, in their responses, users highlight the comfortable position of the handle in their hand during drilling operations, equipment (extra battery + durable case with a spacious organizer), and well-built backlight, which facilitates the use of a screwdriver in conditions of insufficient visibility.

2 Makita DF330DWE

The next place in the rating is the development of Japanese designers, the Makita DF330DWE unstressed drill / screwdriver. Makita is considered one of the most popular brands of power tools. The quality and reliability of the Makita tool is proven by millions of users worldwide.

Model Makita DF330DWE is one of the most successful in the company's lineup. In our TOP-3 - this is the best cordless screwdriver in terms of battery charge rate. From “zero” to full charge it takes only 30 minutes. True, the model is slightly inferior in power to the leader, showing a maximum torque of 24 Nm. The device is sold in a very convenient and nice case. It is small in size, with all the necessary fit without problems.

A distinctive feature of the model is a unique LED attenuation system in the working area. The LED after the release of the trigger goes out immediately, but gradually. The package comes with two Li-Ion batteries, with a capacity of 1.3 Ah.

User Reviews

Advantages: lightweight, reliable, convenient case, excellent design, capacious batteries, fast battery charging, backlight

Disadvantages: not powerful enough, poor quality of the cartridge, there is a backlash

Makita DF330DWE video review

1 Metabo PowerMaxx BS Basic 2.0Ah x2 Case

The leading place in the ranking of the best cordless screwdrivers is rightfully occupied by Metabo PowerMaxx BS Basic 2.0Ah x2 Case. The model is the best on several points at once:

1. The lightest screwdriver - weight is only 800 grams. With this tool you will work for a long time without straining your hands.
2. The most powerful - torque model is 34 N · m. For comparison, the closest competitor Makita DF330DWE shows only 24 N · m.
3. The most capacious battery is 2 Ah. In this case there are two Li-Ion batteries included. So you can work without recharging for a very long time. The best option for professional use.

There is also the possibility of using bits without a cartridge - it will allow to drill a hole or unscrew a screw from hard-to-reach places.

Homeland brand Metabo - Germany, but production is established in China. You should not pay special attention to this fact, since almost all popular screwdrivers are made today by the “Chinese”.

Included is a good set of bits in a convenient case. Bits of medium quality, optimal for home use. For professional work, of course, it is better to purchase more durable bits.

Metabo PowerMaxx BS Basic 2.0 is the best combination of price, quality and functionality. Recommended!

User Reviews

Advantages: lightness and compactness, capacious battery, excellent equipment, convenient case, it is possible to work without a cartridge

Disadvantages: there are some complaints about the quality of plastic, the handle is “thick”

Metabo PowerMaxx Video Review

The best inexpensive cordless screwdrivers: a budget of up to 5,000 rubles.

Budget models of screwdrivers are purchased mainly for domestic needs and minor repairs. Their further operation does not involve excessive load on the tool. The maximum torque of cheap models often does not exceed 10 Nm - such power is enough to tighten the screws, but this is not enough for drilling holes in concrete.

3 Bort BAB-14Ux2Li-FDK

An interesting budget model of a universal screwdriver from a Chinese brand, which has become, in essence, a replacement of a rather controversial device Bort BAB-12-P. Of all the advantages with which this version is endowed, it is necessary to emphasize the principal change of the power supply battery. And not one: the kit includes two batteries, and not nickel, but lithium-ion, with no memory effect. Now one full charge lasts about four to five hours of work, and charging takes no more than one hour. True, a small flaw was found here: some users complain about the “unreliable” power supply, which begins to buzz when connected to the network.

From the rest of the “chips” of the model, we can distinguish the presence of reverse, electric adjustment of the spindle speed, as well as the engine brake function as a measure to prevent accidents. The number of revolutions at idle was 1350 per minute, and the maximum torque - 30 Nm. In general, a good tool for home use, moreover, for a very modest price.

2 VORTEX DA-18L-2K

VORTEX DA-18L-2K is a positive reflection of the experience gained from the pillars of the construction tools market, which has incorporated a number of point modifications to expand the scope of work performed. It is noteworthy that none of them concerns design solutions, which allow to significantly increase the spindle speed (here it is 1250 revolutions per minute) and have an effect on torque (28 Nm). However, domestic masters nevertheless offered consumers an interesting variant with the possibility of varying the speed in the entire allowable range in order to preserve the charge of an already not very capacious rechargeable battery (only 1.3 Ah).

Perhaps, the main mystery of the whirlwind DA-18L-2K design remains where such excess weight came from - 2.2 kilograms for a budget model with such characteristics, to put it mildly, a bit too much. As for the rest, there are no complaints about the screwdriver - the charging indicators work properly, the lights for once are really useful, and the bundle covers all the “near-exploitation” needs.

1 PATRIOT BR 201Li

Inexpensive cordless screwdriver of Chinese origin, which is a kind of "workhorse" with low working conditions for everyday household needs. The main feature of the PATRIOT BR 201Li is a capacious battery (2 Ah) with high voltage (20 V) and an ultra-fast charging function that takes only one hour to complete.

From an operational point of view, this model does not present anything outstanding, at least in the most obvious terms. At idle, the spindle produces up to 1350 revolutions per minute, with the torque slightly reaching the round number, stopping at 29 Nm. However, consumers express tacit agreement with the power indicators of the instrument, noting from the merits of a good point illumination, as well as the presence of a “survivable” fuse that blocks the power button.

Top Professional Cordless Screwdrivers

The postscript “professional” in the name of these screwdrivers speaks for itself - the tool of this group is designed for serious installation and construction work and meets the highest requirements for quality and performance. The main features of the models in this group are increased spindle speeds (not lower than 1350 revolutions per minute), high torque (from 50 Nm), as well as an abundance of additional structural elements and built-in functions.

3 Bosch GSR 180-LI 1.5Ah x2 Case

The rating is opened by a level model of a screwdriver from the German company Bosch, showing excellent power characteristics. According to consumers, the first months of the GSR 180-LI 1.5Ah x2 Case work without a single gripe: the two-speed machine copes with drilling holes of small and large diameter (up to 35 mm in wood and up to 10 mm in metal), the benefit is that 54 Nm allows such operations.

The main problem begins to manifest itself at the stage of long-term operation (from six months or more) and is expressed in the failure of the keyless chuck. In some instances, beats begin to appear, which, of course, negatively affects the accuracy of the hole being drilled. And if in an irresponsible work on metal (taking into account the maximum diameter of the drill), this fact is uncritical, then drilling into wood can cause a lot of trouble. As a screwdriver, the Bosch GSR 180-LI 1.5Ah is perfect without the slightest criticism.

2 AEG BS 18G2 Li-152C

AEG BS 18G2 Li-152C occupies an honorable place in the rating of professional screwdrivers. Screwdriver invented in Germany, but currently produced in China. The practice of locating production facilities in China today is used by virtually every brand of power tool.

What positive I would like to note in this screwdriver. Firstly, this is the maximum torque of 50 Nm - one of the best indicators in the rating. Secondly, it is very thoughtful ergonomics. So, in the case of the drill-screwdriver there is a special socket for fixing bits. Due to this, you can keep on hand the most running bits, rather than folding them on the floor or in your pocket.Yes, maybe it gives extra weight to the tool, but no one forces you to stack all the bits - it’s enough to take 2 - 3 top gears for the current work.

Also worth noting is the presence of keyless chuck, spotlight and torque control. AEG BS 18G2 Li-152C is made in a strict and in some sense aggressive design.

The obvious disadvantage of AEG BS 18G2, according to user feedback, is a weight of 1.8 kg. Otherwise, this is a great model. One of the best screwdrivers for professionals.

1 DeWALT DCD791D2

A high-performance cordless screwdriver from the company DeWalt, able to meet the needs of any user in the professional field of activity. Despite the increased dimensions of individual nodes, American developers managed to keep the weight of the product at 1.5 kilograms, which is the best indicator in the category. In parallel, the operating modes were upgraded (relative to older versions): the spindle speed increased to an impressive 2000 revolutions per minute, and the torque to 70 Nm. Thanks to such indicators, users got a unique opportunity to work with viscous and non-compliant materials, drilling or screwing in them connecting elements (screws, screws, etc.)

In addition to the above, a huge number of options and functions were added to DeWALT DCD791D2, ranging from the possibility of controlling the rotational speed to the notorious reversal of rotation. Also worth noting is the brushless motor at the heart of the design - no problems with switching, and, consequently, an increased working resource.

The best mid-level drill / screwdriver

Cordless drill-screwdrivers of the semi-professional level do not always differ from the budget with improved performance indicators (torque, speed, etc.), representing superiority in a single basic complex. As a rule, their main difference is higher assembly quality, increased working life, as well as the presence of additional functions.

3 BLACK + DECKER BDCDC18K

Not the most famous company in Russia, which not so long ago existed in the realities of the purely American market, presented to the domestic users a whole line of inexpensive cordless screwdrivers with the drill function. The most paradoxical in this compilation was the model BLACK + DECKER BDCDC18K, a medium level, but with a very specific set of performance characteristics. The maximum rotational speed here barely reaches 650 revolutions per minute, which imposes a number of restrictions on the possibilities of drilling holes in dense metal. In this case, the torque on the chuck can increase up to 30 Nm, which allows in some cases to wield 10-millimeter drills.

Despite the strange configuration of the working parameters of the BLACK + DECKER, the BDCDC18K was very popular with buyers who saw in it the potential to perform everyday household functions (according to the vast majority of reviews). Ergonomics is at a height, the batteries last for a long time, all the extra gadgets work properly - what else is needed for comfortable work?

2 DeWALT DCD710C2

Regarding the drill-screwdriver DeWALT DCD710C2, a rather contradictory opinion is formed: on the one hand, this model has all the necessary characteristics for a home workshop tool, and not the most basic level. On the other hand, an abundance of safety margin and constructive balance cannot atone for the paucity of technical characteristics and a rather high cost.

The whole essence of the claims converges on key operating parameters: the maximum number of spindle turns at idle and torque, equal to 1500 rpm and 24 Nm.Such parameters will be quite enough for work with soft varieties of wood and thin sheet metal, which do not require much effort from the turning mechanism and, as a result, a large torque for turning the cartridge with a drill or with a bat under the screw. All the rest of the wealth of materials, alas, the screwdriver refuses not under force. Therefore, if the priority is to carry out purely light work, and in the first place is the high operational reliability of the elements and the device itself, the DeWALT DCD710C2 is the best, but expensive option, and you should prepare for it in advance.

1 Hitachi DS18DVF3

Another Hitachi rechargeable battery representative based on the use of nickel-cadmium batteries with high working capacity of capacitive plates. Despite the low speed (1200 revolutions per minute), the DS18DVF3 produces 45 Nm of torque, which is enough to fully replace the drill in everyday life.

According to consumer reviews, this tool has a high impact endurance - the rubberized body perfectly protects the “insides” from mechanical damage, allowing you to survive falling from decent heights (3-5 meters). Of the characteristic advantages are also noted good ergonomics and a rather wide range of diameters of drilling tools supported by the chuck for drilling operations. Of the nuances, the most frequent complaints come about the low battery capacity: for comfortable work in the specified modes, 1.4 Ah is still not enough.

Popular vote - who is the best manufacturer of cordless screwdrivers?
We vote!

AEG

Bosch

Makita

Interskol

DeWALT

Hitachi

Metabo

Bison

Bort

Skil

DeFort

Black + decker

Patriot

Total voted: 1696

Vote results