10 best diesel boilers

Diesel-fueled heating boilers are sometimes the only solution for home or industrial premises. Unlike solid-fuel units, the supply of energy is carried out without any human intervention, which is in itself practical and is an element of comfort.

The review presents the best liquid fuel boilers available on the Russian market. Position in the ranking was determined based on the characteristics of the models and successful operating experience by different owners.

Top 10 best diesel boilers

10 SATURN KDB 90 FA

This liquid dual fuel boiler is assembled by a modern technology developed by the Japanese manufacturer of heating equipment TAKUMA. It is quite economical and can serve as a source of heating for a house or a villa of 80–100 square meters. meters The remote control panel allows the unit to be located in a room isolated from the living area. Considering the fact that the boiler runs on diesel fuel, many owners have liked this prudence of the manufacturer. If necessary, the burners can be replaced by another type and used as fuel main or liquefied gas.

A fully automatic heater (the system is equipped with a controlled make-up valve) has a good efficiency of 93%. In the manufacture of hot water used copper heat exchanger. The maximum productivity of hot water is 3.4 liters per minute, which for its power of 10.5 kW can be considered an excellent indicator. Attractive price with high reliability of equipment makes SATURN KDB 90 FA in the domestic market of liquid fuel boilers one of the most popular.

9 ACV N 3

The diesel fuel boiler (can also be used for trunk or liquefied gas) has an open combustion chamber and a steel heat exchanger. Correction of the heating medium heating (up to 90 ° C) is carried out using a mechanical regulator. In general, the design is quite simple, reliable and perfectly suitable for home or industrial heating, office space, the area of ​​which (with a standard ceiling height of 2.7 m) does not exceed 400-420 square meters. meters

Fuel oil boiler ACV N 3 refers to the convection type of equipment that should be considered when choosing a place to install it. The ability to connect an external control system allows you to place the heating unit in isolated areas with a separate entrance (for example, in a garage or any other extension). This possibility provides a high level of comfort of use, because diesel fuel has a rather pungent odor, which is not easy to get rid of.

8 Sime RONDO 3

The performance of a combined boiler, which works not only on diesel fuel, but also on natural gas, can provide efficient heating of rooms up to 240 square meters. meters The heavy-duty sectional heat exchanger of cast iron is highly reliable and capable of long-term trouble-free operation.Work in low-temperature modes can significantly save energy consumption. In this case, no harm to the fuel unit will not be applied.

Controls the operating mode of heating the processor unit, which is best connected to the network through the stabilizer. In addition, there is the possibility of integrating external control. This function is very convenient for the home - especially if the boiler is located in a non-residential area that does not have communication with the residential part of the building. The efficiency of the unit is 94.6%, which is a decent indicator for an atmospheric boiler. With its help, it is possible to organize hot water supply - for this it is only necessary to add a boiler of indirect heating to the heating system.

7 Ferroli Atlas 32

An excellent choice for home, country cottage or industrial premises, whose area is within 280 square meters. meters The boiler can run on diesel fuel or natural gas (including liquefied) and has a single-circuit design. The heat exchanger from cast iron possesses high characteristics and is steady against wear. Its service life is at least 15 years and this is despite the fact that the equipment can operate in low-temperature mode (there is a large amount of condensate), which saves fuel as much as possible.

Being a durable unit, Ferroli Atlas 32 connects to a vertical chimney - the removal of combustion products occurs in a natural way. You should also take into account the fact that he takes the air for work from the room where he is installed. The equipment efficiency is 94.3%, which can be considered an excellent indicator for an atmospheric boiler. Management of equipment operation modes is carried out using a microprocessor unit, therefore a power connection is required.

6 De Dietrich Neovo EcoNox EFU 22

The high-tech fuel oil boiler, working on diesel raw materials, demonstrates the best efficiency - its efficiency is 97.3%. This result is achieved through a chimney of separate construction - the exhaust gases heat the air entering the combustion chamber. This provides fuel savings and reduces emissions, making the boiler the most environmentally friendly among our rating models. The equipment capacity is sufficient for heating buildings of 250-300 sq. M. meters When using the external control connection, the diesel unit can be installed indoors with a separate entrance, which will prevent the spread of caustic odor of petroleum in the residential part. The microprocessor controller that controls the operating parameters is sensitive to voltage fluctuations, and it is extremely undesirable to connect the boiler to AC power without a stabilizer.

The equipment comes with an already installed and tested oil burner, which also offers the advantages of the De Dietrich NeOvo EcoNox EFU 22 over other models. The eutectic cast iron heat exchanger is resistant to aggressive condensate and ensures reliable operation of the boiler for many years. It should be noted that this equipment, although it looks relatively compact (600x834x970 mm), weighs as much as 185 kg.

5 Kiturami TURBO HI FIN 13

The most popular fuel oil boiler for the house is the Kiturami TURBO HI FIN 13 model. A heating device with an efficiency of 90.8% can not only generate heat for a 150-square-meter building. m, but also to supply residents with hot water. The low price does not affect the quality of the device, all parts are made of high-quality durable materials. There are a number of options that increase comfort during operation. You can control the boiler using the remote control, and for the economical consumption of diesel fuel are the functions of absence and presence, the shower mode, the start timer. The need for maintenance is determined by the built-in self-diagnostic system. With a long absence in the house, the device can maintain a minimum level of heat thanks to the anti-freeze option.

Owners of private homes consider the Kiturami TURBO HI FIN 13 diesel boiler an inexpensive and economical heating appliance. A noisy quality model for many users is noisy work.

4 DANVEX B30

Finnish boilers of automatic type DANVEX B30 are perfect for heating systems of private houses and car repair shops. The use of special burners with sensors and other high-tech devices makes it possible to burn not only pure diesel fuel, but also used oil in the furnace. The device is made of reliable heat-resistant steel, the combustion chamber is equipped with special smoke tubes. To simplify maintenance, the manufacturer equipped the model with an ash pan, where solid combustion products are collected in the form of soot. In this case, the chimney always remains stable. With a total heat output of 35.6 kW and an efficiency of 90%, the device can easily cope with the heating of houses, shops and service stations with an area of ​​up to 300 square meters. m

Consumers note the economical use of the DANVEX B30 boilers, the ease of operation and maintenance. The disadvantages include the rapid failure of the burners. But the cost of spare parts is lower than that of American or Chinese counterparts.

3 Buderus Logano G125 WS-25

The single-circuit boiler Buderus Logano G125 WS-25 with high efficiency (96%) has a number of innovations. German engineers managed to achieve high productivity thanks to the coordinated interaction of the heating boiler, burner and control system. The device is notable for quiet operation, this is achieved by optimizing the mixing system. The boiler is simple and easy to manage, all functions are regulated by pressing or turning the appropriate keys. It can be connected to any chimney, soot formation is minimized, which simplifies periodic maintenance. The model is perfect for heating homes, shops, offices up to 230 square meters. m

Owners of cottages and retail properties in a flattering comment on the performance of the boiler Buderus Logano G125 WS-25, the simplicity of its operation and maintenance. The disadvantages of consumers include the high price of the device and spare parts.

2 Navien LST 60KRN

Outdoor fuel oil boiler Navien LST 60KRN is the best option for heating large houses, pavilions, car repair shops. Its high power (60 kW) in combination with an efficiency of 90% allows you to create a comfortable microclimate in buildings up to 600 square meters. m. The heater is made in European style. Its distinctive features are rectangular shape, compact size, low weight. A high-performance device can easily be installed in a small-sized boiler room with ordinary doors. The boiler is equipped with an inflatable burner fan, which allows exhaust gases to be discharged into the existing chimney or through the wall to the outside. Thanks to the well-thought-out design of the heat exchanger, the device will provide the residents of the house or the auto repair shop workers with the necessary amount of hot water.

According to consumer reviews, the boiler copes with heating large buildings and providing people with hot water. The disadvantages include only the high price.

1 Protherm Bison 30 NL

Protherm Diesel Boiler Bison 30 NL is the best choice for a home away from gas pipelines. When installed, the owner will receive the most comfortable heat supply .. Created with the latest developments in the production of heating equipment, the liquid fuel boiler is essentially a universal unit, and can also use natural gas or bottled natural gas as a fuel. When working on diesel feeds, the Baltur BTL burner must be installed.

The estimated capacity of the unit is 27 kW, which is more than enough for houses with an area of ​​about 200-220 square meters. meters The floor construction weighs 121 kg, but at the same time it is more than compact - the boiler has dimensions 45x38x87 (WxDxH), which allows it to be installed in any utility room without any problems.With an open-type combustion chamber, the installation has a fairly good efficiency - 89%. The internal heat exchanger is protected against freezing, and all the details of the single-circuit heater are characterized by a high margin of safety, which makes Protherm Bison 30 NL one of the most reliable among oil-fired boilers.

How to choose a liquid fuel boiler

When choosing a boiler for power, they also take into account the formula according to which the heating is 10 square meters. m requires 1 kW of energy. In order for the device not to work at maximum power, its maximum value should exceed the theoretical calculation by 15-20%. In the case of using a double-circuit liquid-fuel boiler, I add another 20% to the resulting figure to heat the water.

1. First of all, the advantage of a liquid fuel boiler is revealed at the design stage. If we compare with the gas supply, it turns out significant savings. To install a diesel device is not required to coordinate documents with multiple authorities. Approximately, it is necessary to spend up to 120,000 rubles on registration of permits and production of the project for gas supply. Laying the pipeline to the house and wiring will cost about as much again.
2. Owners of car repair shops should take a closer look at oil-fired boilers, which work not only on diesel fuel, but also on used engine oil. In this case, the costs of space heating can be minimized.
3. As for the cost of heating the house, the calculation of diesel fuel is carried out, starting from a simple formula. To produce 10 kW of heat, 1 kg of diesel fuel is burned per hour. To maintain heat in the house 100 square meters. m. during the day will have to stock 24 kg of diesel fuel. In a month the consumption of liquid fuel will be about 720 kg. If the heating season lasts 7 months, it will take up to 5,000 kg (4300-4400 l) of diesel fuel for heating.

When determining the manufacturer, specialists conditionally divide all firms into several categories.

1. Leading positions are occupied by such German brands of oil-fired boilers as Viessmann Vitorondens, Buderus Logano, Vaillant iroVIT VKO. They are traditionally distinguished by excellent quality and functionality.
2. De Dietrich, Fondital Capri, as well as South Korean brands Kiturami and Navien impose serious competition, both in price and quality.
3. Recently, Finnish DanVex B and American EnergyLogic EL companies appeared on the domestic market. They were able to offer domestic consumers interesting devices for Russian high-level conditions.

Popular vote - who is the best manufacturer of diesel boilers?
We vote!

Viessmann

Navien

Buderus

DANVEX

Kiturami

Protherm

De dietrich

Ferroli

Sime

ACV

KDB

Total votes: 39

Vote results