12 best tile adhesives

Tile adhesive today is one of the most popular building materials. With its help traditional ceramics or porcelain tile keeps within, the transparent mosaic is mounted, finishing from a marble or a natural stone becomes. Adhesive compositions differ in purpose, price, color and other technical characteristics. In order for the average consumer to choose the optimal mixture for the repair of an apartment or house, one should pay attention to several important parameters.

• The ductility of the glue allows you to quickly perform the finish, it does not stratify and does not spread during operation.
• After curing, the glue line must remain elastic to withstand deformation loads and vibrations.
• A valuable quality for a tiler will be the speed of primary drying. The larger the gap, the longer it will be possible to make changes to the position of the tile.
• Good adhesion allows you to install tiles on different bases without additional processing and preparation. At the same time, the tile is held securely and does not slip spontaneously.

Our review includes the best adhesive compositions for different types of finishes. In selecting, in addition to technical characteristics, expert opinions and consumer reviews were also taken into account.

The best all-purpose tile adhesive

If used for finishing tile materials of small sizes (within 100x100 - 150x300 mm), you can use universal adhesives. Among them are the most affordable products, as well as high-quality professional blends. This glue is suitable for interior decoration, where you do not need to solve super-tasks.

3 Bergauf Keramik Pro

Securely holds various tile materials Bergauf Keramik Pro glue. Its distinctive feature is the high elasticity of the seam after drying. The composition is able to hold for many years, as a standard ceramic tile, and fashionable clinker, natural or artificial stone. The glue retains its qualities in a wide range of temperatures (-50 ... +70 ° C), which allows it to be used for outdoor work or to revet a warm floor. Comfortably feels like a dried seam in wet conditions, so it is also suitable for a shower or a bathroom.

User feedback indicates both the advantages of the glue and its disadvantages. If the majority of consumers are satisfied with the price, elasticity, versatility, then the masters express a number of grievances. First of all it concerns the complexity of working with a thick layer, while the lifetime of the finished solution is limited to 20 minutes.

2 Volma Ceramics

Volma, a well-known domestic manufacturer of dry construction mixes, managed to create the most affordable tile adhesive. The product with the name of Ceramics has in full the best qualities of the cement composition. Professional tilers emphasize the viability of the solution, you can use the prepared glue for 3 hours.At the same time, it is possible to adjust the position of the tile for 10 minutes. The composition behaves well with different thickness of the seam (2-5 mm), if the work is carried out with standard ceramic tiles. The mixture is suitable for laying small porcelain stoneware. The frost resistance of the glue (F35) allows you to perform outdoor work, is not afraid of the dried seam and the conditions of wet rooms.

Users in the reviews report on the efficiency of the composition, affordable price, quick stirring, comfortable consistency. The disadvantages include only a limited species composition of the tile.

1 Litokol Litoflex K80

One of the best tile adhesives for universal use is the composition of the Litoflex K80 Italian company Litokol. They are used by Russian finishers when they have to lay different types of tile materials. The glue will cope not only with fixing the tile inside the premises, it can also be used to work outside. The mixture is made on a cement base, but due to the addition of synthetic resins, the manufacturer managed to achieve a high elasticity of the seam. Experts note high adhesion, moisture resistance, environmental friendliness. The scope of the product is wide, it is the walls and floors inside the rooms, stairs, terraces, balconies and facades. Glue penetrates deep into the base, therefore suitable for concrete, cement-sand, plasterboard bases, as well as for heated floors.

Users praise Italian glue for the minimum amount of dust when working, high quality material. The downside is the high price and shortage in the trading network.

Best reinforced tile adhesive

Big tile has a serious weight. Therefore, for laying ceramics or porcelain, concrete or stone slabs it is recommended to use reinforced tile glue. It has a high adhesion, resistance to static and dynamic loads.

3 Unis Plus

One of the most popular compositions for gluing tiles lately has become the domestic Unis Plus glue. This can be judged by the number of requests in Wordstat, as well as by the number of purchases on NM. The secret of popularity lies in the combination of reasonable prices and excellent technical parameters. When laying heavy tile materials (porcelain stoneware, stone, clinker tiles), you can vary the thickness of the seam from 2 to 15 mm. Builders note the convenience of working with the composition, for 3 hours the prepared solution retains its viability. And to make adjustments to the position of the tile can be for 20 minutes.

Along with a lot of positive feedback from users, there are signals about low-quality products. Some people associate this with the deterioration of technological discipline in the enterprise, others are confident in the mass imitation of the popular glue.

2 Weber Ultra Fix Winter

When laying tiles is necessary at a negative temperature, Weber Ultra Fix Winter glue will be the best choice. Even at -10 ° C, it is possible to perform exterior work with high quality. Few of the competitors can boast of frost resistance (over 150 cycles). Such unique abilities were highly appreciated by Russian tile builders; they recommend customers to buy this composition for decorating ramps, terraces, balconies and stairs with tiled materials. The advantage of the mixture is high adhesion to various bases, including waterproofing materials. The only exceptions are bitumen coatings. As for the species composition of the tile, the seam can withstand large-format stoneware, ceramics, artificial and natural stone.

In the reviews, users express satisfaction with frost resistance, plasticity and strength of the adhesive. The disadvantage of the composition is the high stickiness of the prepared solution.

1 Ceresit CM 17 Super Flex

Ceresit CM 17 Super Flex can cope with any kind of mineral tile. The product is reinforced with Fiber Force microfibers, which make the seam elastic and durable. Reinforcing mesh allows the use of adhesive composition on the most complex foundations that are subjected to vibration or mechanical stress. High adhesion significantly expands the scope, starting with concrete surfaces and ending with plasterboard. Since the main adhesive is cement, the composition can be used when performing outdoor work. The temperature range of operation (-50 ... + 70 ° C) is suitable for almost all regions of Russia.

In the responses of domestic consumers such epithets to the address of glue prevail, such as “excellent glue”, “Ceresit CM 17 - the best”, “most reliable”. Tilers also describe with admiration the merits of the product. But the high price becomes a stumbling block for many Russian homeowners.

The best moisture resistant tile adhesive

In rooms with high humidity, special glue is required. It should not only be immune to water, but also be inert to chemical and biological effects. Therefore, additives are added to such compounds that prevent the appearance of mold or fungus.

3 Unis 2000

Russian glue Unis 2000 is designed for laying tiles in dry and wet areas. The strengths of the product are high adhesiveness and fast drying. After a day on the tile, you can walk, and the remains of the dried glue in the tile joints will not be easy to remove without any special means. Experts note the viability of the prepared mortar (3 hours), sufficient time to adjust the tile (20 min), as well as a wide range of thicknesses (2-15 mm). Therefore, in capable hands, ceramics, porcelain, stone will evenly fit on unprepared surfaces.

User reviews do not differ monotony. Many praise the composition for drying speed, good adhesion to the base, moisture resistance and durability. In addition, the product is widely represented in the trade network. Of the negative points, a high flow rate stands out, and glue seams crumble after drying.

2 Ceresit CM 11 Plus

Experts use Ceresit CM 11 Plus glue in the most humid premises for laying tiles. Its surprising moisture resistance allows to finish the small closed pools with tiled materials. Due to the introduction of a special elastophicator, the composition perfectly adheres to deformable substrates (drywall, heated floor), ceramic facing, young concrete, cellular blocks. The master must knead such a volume of solution so that he can work it out within 2 hours. It is possible to correct a tile in the first 20 minutes, after installation. The optimal thickness of the layer tilers consider 7-8 mm.

In consumer reviews, positive ratings of glue properties prevail. The composition is well made, easy to apply, quickly set, withstands high humidity. The disadvantage is that users find the mixture has a small shelf life in the opened package.

1 Knauf fliesen

Many flattering words from domestic tilers can be read on construction forums addressed to Knauf Fliesen glue. One of the main advantages of the product, according to experts, is ease of use. The composition is made on a cement base, it mixes perfectly, after cooking it turns out to be plastic and docile. Possessing moisture resistance and resistance to slipping, glue is considered the best for laying tiles on facades, walls of bathrooms and shower rooms. Mix is ​​suitable for installation of ceramics, porcelain tile and other tiled materials. The prepared solution must be worked out within 3 hours, and adjustments to the position of the tile are allowed no later than 10 minutes.

Consumers value Knauf Fliesen glue for environmental friendliness, frost resistance and quick kneading. It is well made and affordable.Special complaints on the composition of the reviews are not noted.

The best tile adhesive for mosaic and marble

Beautiful veneer is obtained from mosaic or marble. But in order not to spoil its chic appearance, white tile glue is required. It will emphasize the beauty of transparent and translucent tiles, the nobility of marble or natural stone.

3 Mapei kerabond t

For laying heavy mosaic tiles on the ceiling, floor or walls, Mapei Kerabond T glue should be preferred. It is available in white and gray cement composition. High adhesive ability allows you to mount tile materials on both horizontal and vertical surfaces. At the same time, experts note the absence of creeping or falling. The mixture has a high moisture resistance, which is especially important when laying tiles in the bath. The product is characterized by long-term viability (8 hours), the possibility of using it for a warm floor. The master can make an adjustment within 45 minutes after gluing the tile.

On forums, heated debate arises over the preparation of the working solution. Some tilers are good at working on water, others recommend using Isolastic. The composition is not suitable for use on deformable substrates (drywall, asbestos cement).

2 Litokol Litoplus K55

Dry adhesive composition Litokol Litoplus K55 is made on the basis of white cement. Thanks to this formula, it is perfect for gluing natural white stone, transparent and colored mosaic. Specialists consider a high thixotropy to be a distinctive feature of the product, due to which tiled materials do not slip on vertical bases. With the help of glue, it is possible to carry out external work, since the temperature limit of operation is -30 ... + 90 ° С. Suitable mixture for laying tiles on the warm floor. Walking on a new tile is possible after a day, and full operation is possible after 14 days of exposure.

Users in the reviews say that the adhesive has all the necessary qualities for laying a transparent tile or mosaic. The solution can be used for 8 hours, and the tile position can be adjusted up to 40 minutes. White seam quickly hardens and securely holds the lining.

1 Ceresit CM 115

Many masters consider the composition of Ceresit CM 115 to be the best tile adhesive for marble or mosaic lining. The ideal white color of the seam after drying is its main advantage. Therefore, the mixture does not stain the slabs of light stone, marble or transparent mosaic. In addition to this property, experts highlight such positive aspects of the adhesive as environmental friendliness, the possibility of mounting on a warm floor, use for outdoor work, and resistance to moisture. The prepared solution retains its viability for 2 hours, and the initial setting occurs after 25 minutes. The thickness of the adhesive joint should be from 4 to 10 mm, then the tile will not slip with vertical installation.

In reviews, users note the perfectly white color of the seam, its strength and moisture resistance. But working with glue is not recommended for beginners. In addition, you must first carefully prepare the base for lining.

Popular vote - who is the best manufacturer of tile adhesives?
We vote!

Knauf

Ceresit

Miners

Volma

Unis

Bergauf

Mapei

Weber Vetonit

Litokol

Ivsil

Other

Total voted: 183

Vote results