Top 15 stabilizer struts

The original stabilizer of a car such as the Lada Vesta may require replacement after 5-10 thousand kilometers. Owners are trying to put more hardy parts, while focusing on their financial capabilities. Making the choice, you should pay attention to the fact that the TOYOTA RAV 4 is completely identical design of the front stabilizer struts - just 1 cm longer. This allows you to install higher quality consumables on Vesta, and a slight difference does not have any effect on the performance of the suspension. Our review presents the best manufacturers of this type of spare parts on the domestic market.

For the convenience of the reader, the rating has been divided into several categories. The position of the models was determined on the basis of the characteristics declared by the manufacturer, as well as recommendations of the specialists of the service centers, who by the nature of their activities have information about the endurance of the details of a particular company.

The best inexpensive stabilizer

The most popular and affordable segment of the domestic market unites manufacturers whose products are trustworthy.

5 Febest

The German brand has long been known in the Russian auto parts market and is valued for its democratic value with the traditionally high quality of components. And this is despite the transfer of the company's main facilities to the territory of the PRC. Requirements for production and careful control of the process allow us to keep the quality of spare parts in strict ISO 9001 framework.

Febest front strut stabilizers are available for many car brands (ranging from Subaru Impreza and ending with the domestic Lada Vesta), attracting a fair price and a clear lack of marriage. In addition, they are able to withstand the harsh conditions of our roads for quite a long time.

4 Swag

One of the few firms that has retained its factory capacity from moving to China, which also deals with the packaging of spare parts. A feature of the manufacturer is the constant expansion of the range in accordance with the requirements of the market. As for quality, it is at a confident average level, not exceeding in its characteristics the original parts of many foreign cars.

At the same time, choosing the front stabilizer SWAG for domestic cars (Lada West, Grant, Largus and other modern models), the user receives a product that "nurses" at the original level. Given the affordable price, it is safe to say that spare parts from this company are worth their money.

3 Febi

Despite an extensive track record and production of spare parts for Mercedes-Benz (Mercedes-Benz), Volvo (Volvo) and Opel (Opel) cars, the Febi brand receives mixed user reviews. In general, the attitude to the company looks like a biased and drags on from year to year, but, it is necessary to recognize that in terms of the manufacture of stabilizer struts, things are not so sad. It is possible that the current situation is the influence of the general condition of domestic roads, since spare parts are in great demand in the homeland of Febi (Germany).

The fact that the company has retained its capacities in Germany and continues to use high-quality raw materials in the production is in favor of the stabilizer struts from this brand. The budget cost at the same time gives the product significant advantages in the market. However, there is another side of the coin - the presence in the sale of a certain percentage of counterfeit, which is sold under the guise of products of this brand and causes damage to the reputation of the company.

2 Optimal

Another representative of Germany in the automotive parts market. Like the below mentioned Febi, Optimal has rather inconsistent user reviews, with a margin of "plus". If in the case of “Phoebe” it is impossible to state unequivocally what is the reason for such harsh statements from domestic motorists, then this company has the main problem in the dispersion of enterprises. The Polish and German branches produce high-quality stabilizer bars, while China “drives” not the best products to the market.

To top it all, the network is increasingly saying that Optimal has become a packer and stopped producing its own parts. Rack stabilizer of this brand are available for many brands of cars (Citroen, Chevrolet, Fiat and others). At the same time, the quality is at the same level as the price, without exceeding the original production in terms of its resource. Despite the occurring marriage, Optimal parts are in demand on the market because of their price.

1 Rts

The Spanish auto parts manufacturing grand equips the market with very high-quality stabilizer struts. All production work takes place in the EU, and from there spare parts go to the Russian market. To say that the quality is on top, it is not always possible. Sometimes (and this is some kind of collapse) racks come with torn anthers, and this is not the merit of careless transportation. Such a feeling that the quality control of the party at the exit is completely excluded from the production process. Fortunately, only rubber parts suffer, because there are no complaints about the gland.

If we sum up, then we can confidently talk about the good quality of the goods. Rack stabilizer of this brand have virtually no fakes in the domestic market. When choosing, one should pay attention to the condition of the anthers - sometimes there are deviations in quality when they are pressed in. In the rest - spare parts are quite reliable, and can easily serve longer than the original.

The best rack stabilizer middle price segment

In this segment, there are many more companies whose parts are characterized by better reliability and long service life.

5 Fenox

One of the best brands in the post-Soviet space is initially focused on the market of the CIS countries. Front suspension strut are one of the high-quality products in the thousands list of manufactured parts. From the range offered, you can find and supply a whole range of parts for popular cars in Russia, such as the Lada Vesta, Largus or Renault models (Sandero, Logan and Duster).

The fact that the production has passed certification according to the standards of the European Union can additionally tell about the high quality of products.In addition, the existing contracts for the supply of spare parts to service centers (located in 50 countries of the world) for servicing prestigious European brands of cars do not give reason to doubt the reliability of Fenox.

4 MAPCO

This German brand appeared relatively recently in the domestic spare parts market, but managed to gain popularity among buyers. This company is not a packer, but a manufacturer, and its parts meet the high requirements of the European market, which is more selective for quality products.

To put the front stabilizer MAPCO on the car (suitable for a wide model range, including Lada Vesta) means to ensure that there are no problems in this node for at least 20 thousand mileage, and this is despite the quality of the roads. Especially for harsh environments, a series of HPS stabilizer struts has been released, which is more resistant to wear and will last much longer. The growing popularity of products of this company attracts not only buyers - there are fakes on the market that harm the brand image and also cause material damage. As a rule, the counterfeit makes itself felt during the first weeks of operation, therefore, the choice of suppliers should be taken more carefully.

3 Delphi

The only representative of the middle segment of the top three, not mired in the abyss of endless proceedings on the curtailment of production. The American concern works conscientiously - the well-known German brand Opel (Opel) is among the consumers of the “hodovka” spare parts on the official contractual basis. In terms of the quality of the stabilizer struts produced, the company is among the sturdy middle peasants (as well as in price). It is difficult to say about the working resource - it all depends not only on the condition of the roads, the characteristics of the cars and driving style, but also on the correct operation of other parts of the chassis.

Advantages and features:

• has a contract for the supply of parts for cars Opel;
• users note good product quality;
• the cost is within the normal range for the middle segment.

Disadvantages:

• are missing.

2 Sidem

Rack stabilizer from the European manufacturer are among the highest quality in its segment. Almost 90% of the products are produced by the company itself, the remaining 10% is shipped by less well-known firms (but the quality is also not bad) under the Sidem brand. Real car enthusiasts tend to choose racks of this particular manufacturer, while prudent avtomans are much more attracted to inexpensive (and lower quality) racks from other companies.

Which is characteristic, because of the poor demand for spare parts, they are not fake - front companies are simply uninteresting. The range of car models for which the company's products are suitable makes it very popular in the European market, which cannot be said about Russia. Own production, which has a serious control over the technological process, prevents the marriage from falling into the hands of the consumer. The front stabilizer of this brand have great endurance, comparable to the original auto parts such as Skoda Octavia or Ford Focus.

1 CTR

Korean manufacturer that supplies spare parts for Kia (Kia) and Hyundai (Hyundai) on the secondary market. Specializes only in the suspension, so you should not worry about the quality of the stabilizer struts purchased. Ironically, the CTR does not have any problems with fakes, so finding the original is easy. In addition to the release of spare parts under their own label, they actively ship those to packaging companies (the same Lemforder). Have a brilliant reputation with users and attractive price.

Advantages and features:

• active supplier to the secondary market stabilizer struts for Kia and Hyundai;
• gives not always complete, but accurate information about spare parts;
• ship part of the manufactured products to other firms;
• racks are optimal in cost;
• Fakes are extremely rare.

Disadvantages:

• not detected.

The best premium class stabilizer

The most attractive category for those buyers who look at the cost in the last turn, making the choice solely on the high performance of the product.

5 ABS

The range of this leading European company for the manufacture of spare parts for car suspension has about 30 thousand items. Specializing mainly in the production of consumables for brake systems, ABS has gained great popularity in the markets of different countries. Since 2005, the range has been significantly expanded and, among other things, stabilizer bars have appeared for many cars, including Russian brands (Lada Vesta, Largus, etc.).

Everything that comes from the conveyor of the factories of this brand, in terms of quality, meets the strict requirements of ISO 9001. The manufacturer uses only the best raw materials, which determine the high wear resistance and durability of parts. All ABS components have factory marking and high-quality packaging, which makes it possible to distinguish original spare parts from counterfeit products with due care: it has a long service life.

4 MOOG

The largest manufacturer of spare parts for car suspension is distinguished by product reliability and lack of rejection thanks to a modern quality control system. The premium segment attracts unscrupulous traders who issue counterfeits for branded goods, although the external characteristics of the original units are at a high level that is easily distinguished by the naked eye.

Assembly lines of brands such as GE and FORD use MOOG components in the primary assembly, so there is no reason to doubt the quality of the products. In addition, the details of this company can be put on many domestic cars - the resource of spare parts will be noticeably higher than the original components. Front stabilizer for the Lada Vesta (KILS8342 catalog number) are neat and will last longer than their competing counterparts.

3 Lemforder

The once magnificent auto parts company (including stabilizer struts, among others) is currently showing how “sturdy” from production is living out its age. Seven years ago, it was simply impossible to think that Lemforder would be retrained as a packer company. Now it is worth taking for granted, but you should also pay tribute - in the original packaging under the Lemforder label, level stabilizer posts from the Korean CTR are distributed. In the end - in front of us is a brand with a brilliant past, which now demonstrates the wonders of marketing and surely keeps afloat.

Advantages and features:

• under the brand of this company you can find at least a cool stabilizer from CTR (at present);
• the original racks were, in essence, the work of the Boge company
• the firm is part of a concern consisting of five companies;
• the originality of the parts can be identified already by reviewing the packaging box;
• Parts cover three segments of the market (based on their price level).

Disadvantages:

• if you do not go into the little things, then there are no disadvantages.

2 TRW

A giant in the production of parts for a wide market, as it affects both the aerospace and military industries.He has existing contracts with several car manufacturers for the supply and production of a large range of products. As for the details of the chassis, the products very rarely fall on the secondary market. Find the original stabilizer from TRW somewhere in the malls is problematic, although they are worth it. Their main mass is shipped to the warehouses of official dealers or goes straight to the conveyor.

Only repaired parts or a gross counterfeit, which crumbles in the first stages of use, reach the secondary housing. But it is possible to determine counterfeit, and first of all it is necessary to carefully choose a supplier - if the official representative values ​​his image (and this is very easy to notice), then the stabilizer from the TRW company will have exclusively original origins. Despite the high popularity and excellent quality, the price of the products is quite democratic, which was noted by the consumer.

1 Ruville

A clean packer who values ​​his own reputation. Rack stabilizer, as well as other parts (with the exception of body parts and electronics), are of exceptionally high quality and resource. Since other companies are engaged in production, it makes no sense to list the supported auto models. Another important advantage is always accurate and up-to-date information on the applicability of a particular rack, since the number of models is very large. If it were not for the high price, a part of which is simply wrapped up for the "brand", then you could call the company the best in its class.

Advantages and features:

• high quality racks supplied;
• cooperation with top manufacturers of auto parts;
• delivery of parts for a wide range of auto models.

Disadvantages:

• overpriced.

Popular vote - who is the best manufacturer (supplier) of stabilizer struts?
We vote!

Febi

Optimal

Rts

CTR

Ruville

Lemforder

TRW

Sidem

Delphi

Swag

Febest

MAPCO

Fenox

MOOG

ABS

Total votes: 667

Vote results