10 tips for choosing a thermopot

Popular vote - which manufacturer of thermos is the best?
We vote!

Bosch

Redmond

Brand

Caso

Panasonic

Lumme

Scarlett

Zojirushi

Supra

Mitsumaru

Total votes: 3

Vote results

Before you go to the store for shopping, decide: what water temperature do you regularly need? How long should it stay hot?

Most devices have from 1 to 6 temperature regimes. The more of them, the higher the cost of the device. Switching is performed through a mechanical (traditional buttons and switches) or an electronic (touch panel) system.

The best choice is a thermotube with 3-4 modes of operation, since the water heated in it can be used to brew various beverages. For example, coffee is made at a temperature of 95 ° C, and black tea at 98 ° C.

Absolutely all thermopots heat water, switching on at regular intervals of time: this is precisely the “trick” of the device. Keep in mind that each successive switch on is a consumption of electricity, therefore, the devices heat the water for a certain time and then turn off automatically.

The time of continuous work for each model is different, it basically ranges from 3 to 12 hours. The choice depends entirely on your preferences.

ConclusionA: The more temperature regimes, the higher the functionality of the thermotube. If your financial capabilities allow, choose models with a long time of continuous operation and control through the touch panel.

The higher the capacity of the thermopot for the house, the faster the water will be heated to the set temperature. The maximum indicator - 1 kW (1 000 W), it provides heating of water to 100 ° C for 8-10 minutes.

The optimal power - 700-800 watts. Such thermopots are represented in the lines of all manufacturers, since they are cheaper than the first category of devices, but at the same time they quickly heat water. Budget models have a capacity of 600 watts. They heat water longer and are only suitable for single use or a small family, since their volume is minimal.

After boiling water activates the mode of maintaining a certain temperature, which consumes about 90-100 W / h. The most economical devices are those that spend a minimum of energy to maintain temperature.

Conclusion: keep in mind that even a high-quality thermal steam, regardless of its capacity, will heat water 2-2.5 times slower than an electric kettle.

Standard thermopots are designed for 2-5 liters of water. For small families, suitable device, the volume of which is 2-3 liters. They are faster heated and more economical to consume electricity. If the family is bigger or guests frequently visit you, then buy a different size thermopot.

The greater the volume of the device, the stronger and more convenient its handle should be. There may be several of them if the capacity of the thermopot reaches 7-13 liters. Before buying, try to pick up the device you like to evaluate the convenience and reliability of the handles.

Conclusion: In order to choose the right thermopot, focus on the amount of hot water consumed by one person Do not forget: the higher the capacity of the model, the more space it will occupy in your kitchen.

As for the exterior of the thermopot, special attention should be paid to the choice of the material from which the casing is made.

Mainly used:

• ceramics,
• plastic,
• strained glass,
• steel,
• natural wood.

If the reliability of a thermoplot is your priority, we recommend choosing metal devices. They do not warp over time, but, unlike glass and plastic devices, they can heat up.

The most attractive and environmentally friendly devices are made of tempered glass and ceramics. However, keep in mind that these materials are quite fragile and require careful handling.

The plastic case practically does not heat up and costs less. If you want to save money, we recommend choosing a plastic device equipped with a bulb made of tempered glass or steel.

The best internal flasks for thermopots are made of glass and stainless steel. They do not react with boiling water, are easy to clean and are resistant to damage.

ConclusionA: The most preferred material for the manufacture of the thermoplot body is metal, for the inner bulb is tempered glass.

Types of heating elements used:

Open	Closed (disk)
Installed in household appliances is extremely rare, since it is considered dangerous and inconvenient to use.	Reliable option, when water is heated on the outer surface of the disk does not form scale.

 

A combined or double heating element is installed in high-quality thermopots, the first is used to boil water, and the second is used to further maintain a certain temperature.

Conclusion: To choose the right, pay attention to models with a closed, combined or dual heater. Among their undoubted advantages - ease of care.

Some thermopots are equipped with special filters designed to clean incoming water. Immediately make a reservation: if you have the opportunity to regularly buy bottled purified water, there is no need to overpay for this function.

Devices equipped with a filter are more expensive. Keep in mind that this element should be changed every 5-6 months, because pollution is gradually accumulating on its inner side. We recommend choosing such thermopots if your family has newborns or small children.

Conclusion: The filter is a useful and practical element of the device, which is worth paying attention to when it is impossible to purchase already purified water.

These criteria thermopota often neglected, and in vain. Agree, it is not enough that the device quickly heats the water to a certain temperature, it still needs to be somehow poured.

Well, if in your house or apartment there are no problems with electricity, then an electric pump at any time will give you a certain portion of water. To do this, simply click on the button located on the device panel. A great choice for kids and seniors.

And what about those who have such problems often? We recommend to choose a thermoshot equipped with a manual or a combined pump. To pour water with it, you need to put some effort: several times to press the big button located at the top of the device. Models with a mechanical pump are cheaper.

Conclusion: The best option is a thermal steam with a combined water supply.It is equipped with two pumps: electric and manual, providing ease of use of the device and its functionality.

Thermopots, like other household devices, work only when connected to the mains, so they are potentially dangerous to use. When selecting, we recommend to make sure that the selected model is 100% safe.

Required functions:

• Blocking the inclusion in the absence or insufficient volume of water;
• Automatic latching of the device lid when the device is accidentally opened or dropped;
• Modern system of protection against overheating of the household appliance, valve shutdown;
• Locking the lid in the thermopot mode of operation to prevent water from pouring into the operating device.

The presence of each of these functions provides protection against electrical closures, accidental fires and burns.

Conclusion: Do not neglect the security parameter when buying a thermoscope. Make sure that the model you like has at least 4 of the above functions.

The simplicity of the design and the narrow specialization of thermopots for home leaves little room for additional options.

However, manufacturers offer the following support functions:

• Regulation of the heating temperature. At the outlet, you can get water from 45 ° C to 100 ° C. Some models are able to maintain room temperature;
• Delay start (timer). A useful feature for thermotubes with a large volume, but a weak heating element. You will be able to independently determine the time of switching on the device and get the water of the required temperature just in time;
• Self-cleaning. This feature is found only in expensive models. The decalcification option greatly simplifies the care of the thermowatt, allowing you to quickly eliminate scale accumulating in the inner flask;
• Sound signal. He reports that the execution of a given program is completed. If your thermal balloon is equipped with a display, you can see which mode is on;
• Platform rotation. Rare but useful feature. It is very convenient to pour tea or coffee into cups, sitting at the table and not running from one guest to another.

In the lines of some manufacturers are devices with a metered water supply. You can customize the volume of servings (for example, especially for your mug).

Conclusion: The more additional features, the higher the cost of thermopot. When choosing options, it is important to consider your own needs.

Low-cost plastic thermopots with a small capacity, presented in the rulers of Russian manufacturers, will cost you 1,000-4,500 rubles. Brand metal or glass models with extended functionality will cost 7,000–15,000 rubles. Thermopots made of natural wood, usually have a high capacity, reaching 10-13 liters. Their cost will range from 20,000 to 22,000 rubles.

The best manufacturers of low-cost thermos (rating by reviews):

• Lumme
• Scarlett
• Zojirushi
• Supra,

The best manufacturers of premium thermal thermos (rating by reviews):

• Bosch,
• Redmond,
• Brand,
• Caso

Enjoy your coffee and tea!